FRP tank, FRP storage tank "Manufacturer" -Lianyi Company <br /> Contact: same manager Tel: 13171765588 Customer QQ: Email: email@example.com Website: bmz.hebeijiayuan.cn/ Address: FRP City Industrial Park, Zaoqiang County, Hebei Province
Your current location ： 全网最准精选六肖 >> Technical Articles
How to transport FRP tanks
1. It can effectively use its soft rope and crane to lift the glass fiber reinforced plastic tank during transportation, and then effectively place it on the wooden board that has been prepared in advance. If the volume is relatively small, the front fork of the forklift can also be wrapped. Padded, place the FRP tank on a wooden board with a forklift.
2. If the glass fiber reinforced plastic storage tank is not installed temporarily, the tank body needs to be placed on the bracket and fixed during use to prevent rolling.Pay attention to safety during the installation of FRP tanks. 3. In the process of coating treatment of glass fiber reinforced plastic storage tanks, the paint needs to be sealed and stored before use. Moisture paint will affect the quality of painting. In addition, if the paint concentration is too large, it must be diluted. 4. In many transportation and loading work, its large glass fiber reinforced plastic storage tank system is often inseparable from its important carrier. Due to the complex properties of many liquid materials, it mainly depends on special application materials. 5. Glass fiber reinforced plastic storage tanks cannot be loaded on the top during the use process. Atmospheric pressure storage tanks in the equipment must not be used under negative pressure. Glass fiber reinforced plastic storage tanks must not be loaded at the time of takeover. The connection with vibration sources must be set to be effective Ground suspension measures. 6. The FRP storage tank should not be close to its fire during operation. It must be far away from the heat source, and the large working pressure of the equipment cannot effectively exceed the specified value of the design. In the process of use, unless it is some special design, The vibration source cold and hot pipes should be isolated from the tank. 7. FRP storage tanks are mainly hydrostatic tanks that are connected to the atmosphere during operation, especially those with vertical flat bottoms. In the process of use, it is necessary to ensure that the tank body and the atmosphere are generally good. And the pressure of the feed or temperature changes. 8. In the process of using FRP storage tank, it will be effectively subjected to the pressure of the liquid on its tank wall. The wind load of its equipment will directly cause the stress of the stiff and the pressure of the tank itself, and the pressure of its equipment. The size of will change as its height changes.
Information location: http://fatwalker.com//jishu/32.html